softmenu.blogspot.com

Break or Reset Administrator password in XP

Posted by B SAI SURENDRA On 3:27 AM 0 comments

So if you have forgotten the password of your admin account in Windows XP or justwant to break in the Admin account of your college or office, do not worry, you can easily do that. However, I recommend this trick only for your personal use. There are numerous ways available to do so but the best possible way is to use EBCD (Emergency Boot CD), download from here..

Procedure:

1. After you have downloaded the EBCD, extract and run “makeebcd.exe” to create an iso image for burning on the disk.

2. Set Bios to boot from the CD Drive and insert the CD created in above step. You will see the following image, type 5 to select NT password for editor (Linux-based).

3. Then press Enter in the next step to proceed.

4. Press Enter again if you don’t keep Windows on SCSI drive.

5. Select which drive contains your installation files or just press Enter to accept the default value given in the bracket. If your installation is in C: drive just press Enter.

6. Press Enter in the next step to accept default values.

7. Press Enter again.

8. To enter password, press Enter to select the default option.

9. Select the username. To enter password for Administrator just press Enter.

10. To change the password just leave it blank and change it later after login (modifying password at this step will not work).

11. Press Enter to confirm.

12. Type ‘!’ and press Enter in the next step.

13. Type ‘q’ to quit.

14. Type ‘Y’ to write the SAM files.

Congratulations the password has been reset. So just login with no password and enter yours

Administrator, break admin password, break xp password, EBCD, Free Beautiful themes for Windows XP, makeebcd.exe, password, tips |

Solution to remove Write Protection from USB Pen Drive

Posted by B SAI SURENDRA On 3:23 AM 0 comments

This seems to be the problem of most of us these days and some of our readers who wanted to know the methods how they can remove the Write Protected error from theirUSB drives like Pen Drives and memory cards.

What is Write Protected error and why it happens?

In the Write Protected error, we can’t write or copy any data in our flash drives and even can’t format the drive.

There are many reasons that cause this problem, let’s see solutions of them.

Solutions:

• First of all try to locate a small switch (if any, that you may have not noticed) at some place on the drive or memory card reader. This is the prime reason for this error. If there is one, switch it to the other side to turn the protection off.

• Yes I know this problem is also occurring these days without this switch but not to worry. Just download this helpful software from here and run it to execute a “low-level format” on the drive. This software is quite handy and may take few attempts to actually remove the error.

• The problem can also be caused by some virus activity so just get it scanned by some updated good anti virus which may solve your problem.

• BUT if none of the methods listed above solves your problem then your pen drivemight have gone corrupted, so just get it replaced.

Hope any of the methods listed above solves your problem.

Update 1:

After the low level format, you may need to “Partition the drive“. Dont worry, partitioning a pen drive means allocating it its File System and Cluster Size that was lost after the Low Level Format.

For that:

1. Run diskmgmt.msc in Run.

2. In the disk management window, select the pen drive, right click on it and click on Format.

3. Now choose the File System and Allocation Unit Size and do not check the boxes below.

Click OK and the drive will be reusable after this.

Update 2 (Better Solution):

Follow the steps in this post and just put the value 0 (zero) in step 5.

This will surely solve your problem now.

diskmgmt.msc, low-level format, memory card, Pen Drive, tips, USB Drives, Virus, Write Protected |

Solution to ‘You may be a victim of software counterfeiting’ Problem

Posted by B SAI SURENDRA On 3:16 AM 0 comments

follow the process........ u will 100% SATISFY

Microsoft has started bugging the users of non genuine copies of Windows. If you are also running a non genuine or pirated copy of Windows then there is a full chance of you getting this notification one day or the other.

he problem was reported by one of our viewers that when she updated her copy of Windows with Windows Update then her system started showing this notification that reads “You may be a victim of software counterfeiting” and “This copy of windows does not pass genuine Windows validation”.

These notifications start coming back again after some time and do not feel good.Though I never encourage piracy but here is how you can remove this problem:

1. Before doing anything serious try restoring your system. If the problem is occurring after the Windows Update then System Restore will surely help.

2. But if it does not then do try this, launch Windows Task Manager.

3. Locate the process “wgatray.exe” and end it.

4. Log in into the Safe Mode and delete the file WgaTray.exe from c:\Windows\System32

5. Also delete the WgaTray.exe from c:\Windows\System32\dllcache

6. Type regedit in Run to open Registry Editor, navigate toHKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify key.

7. Delete the folder WgaLogon and all of its contents.

8. Restart the PC normally.

AUTOMATIC REMOVE WITH OUT FOLLOWING THESE STEPS USE removewga.exe

Update: (IF U r fail in any above process continue the process upto 8th step and finally download removewga and run it to update and restart without warning )

Download this WGA remover tool called RemoveWGA.exe, just download it and run.

risk solution

for task manager : ctrl + alt + del

for safe mode : f8

for system restore : Run System Restore from All programs->Accessories->System Tools

->System restore. Choose a restore point when your system was

OK and click Next.

ICON GONE AT TRAY : BY THESE STEPS

1> go in safe mode…(press F8 while the Pc is starting to go in safe mode)

2> Type regedit in Run to open Registry Editor, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify key.

3> Delete the folder WgaLogon and all of its contents.

4> launch Windows Task Manager by (Ctrl+Alt+Delete)go to precesses click on “wgatray.exe” and then End process

5> delete the file WgaTray.exe from c:\Windows\System32

And You will see the the icon gone………..

non genuine copies of Windows, pirated windows, remove the wga, safe mode, System Restore, tips, victim of xp, wga remover, WgaLogon, wgatray.exe, You may be a victim of software counterfeiting |

Break or Reset Administrator password in XP

Solution to remove Write Protection from USB Pen Drive

Solution to ‘You may be a victim of software counterfeiting’ Problem

TECH REVIEWS

Twick Search

DEVELOPER