BSNL dataone dsl broadband internet trouble shooting
Description This is most common problems. It is due to poor connectivity. Problem can be anywhere between B.RAS - Tier 2 - DSLAM - Modem - PC of the customer.
Remedy Switch off / Switch on Modem (Power Switch at the back of modem ) and wait for 2 minutes. Then retry.
If problem is not solved then Reset Modem [Back pin (in the hole) to be pressed in switched ON condition]
[Note : Link PC in black type Modem or WAN / LAN in white type Modem will go Off and then ON and system may be stable. Then retry.
If problem is still not solved then
a)Check link lamp in Black type Modem or WAN lamp in White Modem. If it is blinking, then it is line problem.
b)Check Modem to splitter connectivity.
i) Jack in & Jack out the cable of / to the modem and to the splitter
ii)Jack in & Jack out the telephone connection of the splitter.
If lamp is still blinking - then it is due to poor line condition / fault.
The case has to be referred to Area Broadband Team for attending the fault.
Problem Error-691
Description User id and Password problem.
Remedy The case is to be referred to Central Broadband Team (08.00 AM to 08.00 PM). Central Broadband Team will reset the password and intimate that password has been reset.
Problem Error-769
Description LAN not enabled.
Remedy
The LAN Card has to be enabled by following the steps given below.
i)Go to Desktop.
ii)Click "My Network Place".
iii)Select Properties.
iv)Click "Enable the local network".
Problem Error- 797
Description Modem or LAN driver problem
Remedy Reset the Modem (in on condition ) by pressing button available in the backside hole of the modem and wait for 2 mintues and then log on. If the problem is not solved then call your vendor to check computer LAN Card driver.
Problem Error-718
Description i)Peak Hour - This problem occurs if loading is high on the system and number of customers exceed the call handling capacity of B.RAS.
ii)Slack Hour -This problem occurs if PPPoE is corrupted.
Remedy i)Peak Hour - Please try after some time.
ii)Slack Hour - Please load PPPoE again.
Problem Error - 630-633
Description Computer LAN Card problem.
Remedy LAN Card has to be changed.
Problem OSP Internet is working, Data One is not working
Description Cable Internet is working. Tata / Reliance is working but Data One is not working. Data One is working through LAN Card. Problem can be seen by observing PC lamp (in black modem) LAN lamp ( in white modem) which might not be glowing or may be blinking.
Remedy LAN Card has to be changed.
Problem Site not opening from Data One
Description From VSNL sites are opening, Dial-Up sites are opening but from Data One sites are not opening. Probable reasons
i)Internet explorer is not supporting the Pope (may be pirated OS).
ii)Virus corrupting Internet explorer.
Remedy The customer is requested to set it right.
Problem BSNL BB DNS server may be having problem.
Description DNS is not responding.
Remedy Ping-61.1.96.69 or 61.1.96.71 and check up whether DNS is responding.
Broadband Utilities
To see usage details Log in to Broadband, Go to 10.240.43.216 or 10.150.128.195.
Click on Service Record. Details of the current month usage and previous month will be shown.
To change password Log in to Broadband, Go to 10.240.43.216 or 10.150.128.195.
Click on 'change password', give 'Old password', 'New password' and confirm. Password will be changed.
Trouble shooting of Broadband Modems
White Modem
After switch ON wait for 2 to 3 minutes to get the modem stable.
If telephone line / dial tone problem, contact '198'.
If Broadband / Internet not working, contact '1600-424-1600'.
Lamp features
i)Power - ON - Red
ii)WAN -Yellow
when stable OK
when blinking Data transfer
when not stable Line is faulty
iii) LAN - Green
when stable OK
when blinking fast Data transfer
when blinking slow Modem to PC link problem
iv)PPPoE - No use.
Reset pin is at backside Hole - to be reset whenever required in ON condition of the modem.
Black Modem
After switch ON wait for 1to 2 minutes to get the modem stable.
If telephone line / dial tone problem, contact '198'.
If Broadband / Internet not working, contact '1600-424-1600'.
Lamp features
i)Power - ON - Red
ii)WAN -Yellow
when stable line is OK
when blinking slow, line trouble.
iii)PC - Green when stable OK
PC - Off- PC not connected
iv)Data - Green - Flashing - Data transfer
Reset pin is at backside Hole - to be reset whenever required in ON condition of the modem.
Remedy Switch off / Switch on Modem (Power Switch at the back of modem ) and wait for 2 minutes. Then retry.
If problem is not solved then Reset Modem [Back pin (in the hole) to be pressed in switched ON condition]
[Note : Link PC in black type Modem or WAN / LAN in white type Modem will go Off and then ON and system may be stable. Then retry.
If problem is still not solved then
a)Check link lamp in Black type Modem or WAN lamp in White Modem. If it is blinking, then it is line problem.
b)Check Modem to splitter connectivity.
i) Jack in & Jack out the cable of / to the modem and to the splitter
ii)Jack in & Jack out the telephone connection of the splitter.
If lamp is still blinking - then it is due to poor line condition / fault.
The case has to be referred to Area Broadband Team for attending the fault.
Problem Error-691
Description User id and Password problem.
Remedy The case is to be referred to Central Broadband Team (08.00 AM to 08.00 PM). Central Broadband Team will reset the password and intimate that password has been reset.
Problem Error-769
Description LAN not enabled.
Remedy
The LAN Card has to be enabled by following the steps given below.
i)Go to Desktop.
ii)Click "My Network Place".
iii)Select Properties.
iv)Click "Enable the local network".
Problem Error- 797
Description Modem or LAN driver problem
Remedy Reset the Modem (in on condition ) by pressing button available in the backside hole of the modem and wait for 2 mintues and then log on. If the problem is not solved then call your vendor to check computer LAN Card driver.
Problem Error-718
Description i)Peak Hour - This problem occurs if loading is high on the system and number of customers exceed the call handling capacity of B.RAS.
ii)Slack Hour -This problem occurs if PPPoE is corrupted.
Remedy i)Peak Hour - Please try after some time.
ii)Slack Hour - Please load PPPoE again.
Problem Error - 630-633
Description Computer LAN Card problem.
Remedy LAN Card has to be changed.
Problem OSP Internet is working, Data One is not working
Description Cable Internet is working. Tata / Reliance is working but Data One is not working. Data One is working through LAN Card. Problem can be seen by observing PC lamp (in black modem) LAN lamp ( in white modem) which might not be glowing or may be blinking.
Remedy LAN Card has to be changed.
Problem Site not opening from Data One
Description From VSNL sites are opening, Dial-Up sites are opening but from Data One sites are not opening. Probable reasons
i)Internet explorer is not supporting the Pope (may be pirated OS).
ii)Virus corrupting Internet explorer.
Remedy The customer is requested to set it right.
Problem BSNL BB DNS server may be having problem.
Description DNS is not responding.
Remedy Ping-61.1.96.69 or 61.1.96.71 and check up whether DNS is responding.
Broadband Utilities
To see usage details Log in to Broadband, Go to 10.240.43.216 or 10.150.128.195.
Click on Service Record. Details of the current month usage and previous month will be shown.
To change password Log in to Broadband, Go to 10.240.43.216 or 10.150.128.195.
Click on 'change password', give 'Old password', 'New password' and confirm. Password will be changed.
Trouble shooting of Broadband Modems
White Modem
After switch ON wait for 2 to 3 minutes to get the modem stable.
If telephone line / dial tone problem, contact '198'.
If Broadband / Internet not working, contact '1600-424-1600'.
Lamp features
i)Power - ON - Red
ii)WAN -Yellow
when stable OK
when blinking Data transfer
when not stable Line is faulty
iii) LAN - Green
when stable OK
when blinking fast Data transfer
when blinking slow Modem to PC link problem
iv)PPPoE - No use.
Reset pin is at backside Hole - to be reset whenever required in ON condition of the modem.
Black Modem
After switch ON wait for 1to 2 minutes to get the modem stable.
If telephone line / dial tone problem, contact '198'.
If Broadband / Internet not working, contact '1600-424-1600'.
Lamp features
i)Power - ON - Red
ii)WAN -Yellow
when stable line is OK
when blinking slow, line trouble.
iii)PC - Green when stable OK
PC - Off- PC not connected
iv)Data - Green - Flashing - Data transfer
Reset pin is at backside Hole - to be reset whenever required in ON condition of the modem.
769 Error - A simple error.
This error has resulted in most of the cases was mainly due to network card getting disabled. Re-enabling the network adaptor has recovered the problem. To do the same, click on START button, Click on Run and type sysdm.cpl and click OK. Click on the tab "Hardware" in the resulting system properties window and then click on Device Manager button. Check for the network adapters to see a red mark to the left side of the network card name. Just Right Click on the same and click Enable. That is all.
The same can also be done by clicking on START>Settings>Network Connections>Local Area Connection for Classic Setup and Start>Connect To>Show All Connections and double clicking on Local Area Connection. In both the cases you would see a small window flashing up saying Enabling.
In case no local area network entry is found in the window, there is a possibility that the card is not recognised by the operating system and needs to be installed manually and the serviceability of the same to be checked as mentioned below:-
It can be confirmed by pinging the router at 192.168.1.1 from the PC. For Type I, Type II models by default the DHCP on the router is disabled. Hence the LAN card is to be assigned an IP Address 192.168.1.10 with subnet mask as 255.255.255.0 and the gateway as 192.168.1.1 and then the ping test is to be carried out.. For Type III and Type IV models the DHCP on the router is enabled by default and hence the LAN card should be required to be put to "Obtain IP address automatically" before pinging. If the ping fails, the issue is with the LAN card only. Either the drivers or LAN card is the culprit in the issue. The command for pinging the router is "ping 192.168.1.1" from the command prompt.
In a couple of cases, where the system has on board LAN card, it was observed that the LAN Card Entry in the system BIOS settings was disabled. The customer is suggested not to try changing the settings without prior knowledge in BIOS.
0 Response to "BSNL dataone dsl broadband internet trouble shooting"
Post a Comment
dont give any links ...it may spoiled your computer only !!